Kenton Leslie Simulator Bedienungsanleitung PDF herunterladen

INSTRUCTIONS FOR MIDI INTERFACE

DYNACORD LESLIE SIMULATOR

USING THE MIDI INTERFACE - - -

When you turn on the synthesiser for the first time, you will be in

omni-on mode for receive (all channels). When you select a receive

channel or other set-up, this will be stored in non volatile memory

to be recalled when you next turn on the synth - all settings listed

on the next page are stored.

If you want to put the machine back to the factory default settings

at any time, switch the synth on whilst holding the red push button

pressed - hold for a couple of seconds then release.

See next page for factory default settings.

RED PUSH BUTTON

1) SET-UP MODE - Setting MIDI channels and assignments.

Give the red push button a short press (half a second) - then release.

Follow this with a note or sequence of notes (on the remote keyboard)

as detailed on page 2. After selecting a channel you will be

automatically returned to playing mode but after making assignments

you will need to press the ENTER key (Top C) to return to playing

mode. This is to enable you to make the multiple key presses required

when re-assigning sources to destinations.

(N.B. set-ups are stored in non volatile memory).

The Leslie speed is changed when the selected controller is half-

way or over ie. a value of 40h (64d) and above will set the speed

to fast, any lower value will set the speed to slow.

The MIDI will always default to speed slow on power up

1 2 3 4

Seite 1

INSTRUCTIONS FOR MIDI INTERFACE DYNACORD LESLIE SIMULATOR USING THE MIDI INTERFACE - - - When you turn on the synthesiser for the first time

Seite 2

C Receive channel 1 [Bottom C on DX-7] MIDI note 36 (24h) Db " " 2 D " " 3

Seite 3

NOTES 1) Controllers X can be any MIDI controller. After pressing the red push button to enter SET-UP mode, operate the required M

Seite 4

MIDI CONTROL OF RED PUSH BUTTON The red push button can be "pressed" via MIDI as MIDI switch number 95 (5Fh) for regular progra

Keine Kommentare

Kenton Leslie Simulator Bedienungsanleitung